Renu

Multiplexador de Puertos

 

Datasheet
Características
DIN Rail or Panel Mounted compact Port Multiplexer
Hardware with three communication ports
RS232 support for Master Ports. PLC port with RS232 / RS422 / 2 or 
4 wire RS485 / CMOS
Connect Two Master devices to any serial device (e.g. PLC, Drive) 
on same protocol
Ideal for PLCs / Drives which have only one communication port
Same model can be configured for different supported protocols
Free Programming software for Port Multiplexer!!
CE marked with optional UL certification

 

Especificaciones  
Power + 24 V DC ± 10%, 100mA max
LED’s 4 LED’s for status indication
Communication Ports


PLC Port
Master 1
Master 2
3 Communication ports
(Isolation between communication ports and Power supply,
through DC-DC coupler is 1 KV)
PLC port with RS232 / RS422 / 2 or 4 wire RS485 / CMOS
Connects to Master Device 1 (RS232 support)
Connects to Master Device 2 (RS232 support)
Temperature Operating : 0o to 50oC
Storage : -20o to 80oC
Humidity 10% to 90% (Non condensing)
Mounting DIN rail or back panel mounting
Dimensions (DIN rail) 105mm(L) X 40mm (D) X 51mm(W)
Weight 125 gm approx.
Certifications CE
Immunity to ESD Level 3 as per IEC 1000-4-2
Immunity to Transients Level 3 as per IEC 1000-4-4
Immunity to Radiated RF Level 3 as per IEC 1000-4-3
Immunity to Conducted RF Level 3 as per IEC1000-4-6
Emissions EN55011 CISPR A

 

 

 

 Psg. D’Olot, 121 3er 1era - 17006 Girona - Telf. +34 972 98 73 98 / +34 938 40 25 24 - Fax .+34 938 40 25 03 - Mvl. +34 678 725 255 - info@aptus-hmi.com
Dynisco, weintek, Protech, Weg, Renu, Indusoft, Indumicro, Wachendorff, Xaloy