renu

FIOA-0800-RP

(RTD Input Modules) 

Datasheet

Software:

FlexiSoft-Update-1.2.exe

FlexiSoft.zip

 

 
Características
Low cost compact RTD Input modules with DIN rail mounting
FIOA-0800-R accepts eight RTD PT1000 type inputs
FIOA-0800-RP accepts eight RTD PT100 type inputs
12 bit resolution
User definable Address, Baud rate and Parity through Switches
High Speed Modbus RTU (Slave) communication
2 wire RS485 port provided on pluggable terminal block
Can be multi dropped as Modbus Slave on RS485 Network
LED Indication for Power and Communication
Very simple to configure through DIP switches. 
No programming Software needed.

 

Especificaciones

Uses 3 wire compensation technique.
Excitation Current is 0.1mA.
Power dissipated in RTD is 0.010mW @ 1000Ω
Range supported : -200 to 850ºC
 
 Especificaciones of FIOA-0800-RP (RTD PT100 Input) :
Uses 3 wire compensation technique.
Excitation Current is 0.5mA.
Power dissipated in RTD is 0.025mW @ 100Ω
Range supported : -200 to 850ºC
General Especificaciones
Power  + 24V DC ± 10%, 2W maximum
Operating Temp.  0º to 50º C
Storage Temp.  -20º to 80º C
Humidity  10% to 90% (Non Condensing)
Mounting  DIN rail mounting
Dimensions  100 W x 70 H x 35 D mm
Immunity to ESD  as per IEC61000-4-2
Immunity to Fast Transients  as per IEC61000-4-4
Immunity to Radiated electromagnetic field  as per IEC61000-4-3
Immunity to Conducted disturbances  as per IEC61000-4-6
Surge  as per IEC61000-4-5
Radiated emission  as per EN61000-6-4
Communication Port  2 wire RS485 terminal block
Communication Protocol  Modbus RTU Slave
Baud rate 
 		  9600, 19.2k, 57.6k or 115.2k
 (DIP Switch Selectable)
Parity  Odd, Even or None 
 (DIP Switch Selectable)
Device ID  1-64 (DIP Switch Selectable)
 Typical Wiring Diagram :-  


Note:
CSx   : Current source (x equals to 1 to 8)
AINx  : Analog input (x equals to 1 to 8)
AGND : Analog ground. Analog ground for all channels is internally shorted
           on PCB
           Connect RTD PT1000 as shown in the above diagram between the
           points CS, AIN and AGND

 

 
 Psg. D’Olot, 121 3er 1era - 17006 Girona - Telf. +34 972 98 73 98 / +34 938 40 25 24 - Fax .+34 938 40 25 03 - info@aptus-hmi.com
Dynisco, weintek, Protech, Weg, Renu, Indusoft, Indumicro, Wachendorff, Xaloy