renu

FIOA-0800-L

(Analog Input Module) 

Datasheet

Software:

FlexiSoft-Update-1.2.exe

FlexiSoft.zip

 
Características
Low cost compact Analog Input module with DIN rail mounting
Programmable inputs allow same module to accept Current (4-20 mA) and 
Voltage (0-10 VDC) inputs
12 bit resolution
Can accept up to 8 V/l analog inputs
User definable Address, Baud rate and Parity through DIP Switches
High Speed Modbus RTU (Slave) communication
2 wire RS485 port provided on pluggable terminal block
Can be multi dropped as Modbus Slave on RS485 Network
LED Indication for Power and Communication
Very simple to configure through switches. No programming Software needed.
CE marked with optional UL certification
Especificaciones

For Current inputs :
Uses 4-20mA input range with 100 E precision shunt resolved in 12 bits.
Total error : ± 0.2% of scale ±1 bit.

For Voltage inputs :
Uses 0-10VDC input range resolved in 12 bits.
Total error : ± 0.2% of scale ± 1 bit.
General Especificaciones
Power  + 24V DC ± 10%, 2W maximum
Operating Temp.  0º to 50º C
Storage Temp.  -20º to 80º C
Humidity  10% to 90% (Non Condensing)
Mounting  DIN rail mounting
Dimensions  100 W x 70 H x 35 D mm
Immunity to ESD  as per IEC61000-4-2
Immunity to Fast Transients  as per IEC61000-4-4
Immunity to Radiated electromagnetic field  as per IEC61000-4-3
Immunity to Conducted disturbances  as per IEC61000-4-6
Surge  as per IEC61000-4-5
Radiated emission  as per EN61000-6-4
Communication Port  2 wire RS485 terminal block
Communication Protocol  Modbus RTU Slave
Baud rate 
 		  9600, 19.2k, 57.6k or 115.2k
 (DIP Switch Selectable)
Parity  Odd, Even or None 
 (DIP Switch Selectable)
Device ID  1-64 (DIP Switch Selectable)
 Typical Wiring Diagram :-  Analog Inputs

Current Mode connections (4-20 mA)

Voltage Mode connections (0-10 VDC)    

 

Note: 
AINx: Analog input (x equals to 1 to 8).
AGND: Analog ground. 
          Analog ground for all channels is internally shorted on PCB.

 

 
 Psg. D’Olot, 121 3er 1era - 17006 Girona - Telf. +34 972 98 73 98 / +34 938 40 25 24 - Fax .+34 938 40 25 03 - Mvl. +34 678 725 255 - info@aptus-hmi.com
Dynisco, weintek, Protech, Weg, Renu, Indusoft, Indumicro, Wachendorff, Xaloy